We photograph the damage, log moisture readings and send the paperwork your adjuster asks for, so you have less to chase.
The quote is free and you see the price before work begins. No surprise charges at the end.
Certified technicians, professional drying equipment and moisture readings you can see for yourself. No guesswork.
Most people who call us have never dealt with attic water damage before. We walk you through it on the phone, then send a local crew with the right equipment.
Attic water damage comes from two directions. Rain gets in from above through worn shingles, failed flashing, or the seals around vents and chimneys. Moisture also rises from the house below and condenses on cold roof sheathing when the attic is not ventilated well. In both cases, almost nobody climbs up to check. Our team in Silver Spring inspects the attic, finds the source, and dries it out.
Most attic jobs center on wet insulation. Fiberglass and cellulose both lose R-value when they get wet, so the home costs more to heat and cool. The bigger problem is that for weeks, saturated insulation holds moisture on the drywall of the ceiling and on the framing. We remove what is saturated, dry the wood with air movers and dehumidifiers, and treat any mold on the rafters or sheathing.
The insulation catches and absorbs whatever rain gets by the roofing. Because the rooms below show nothing, the leak is missed and no roof repair happens.
Mold does very well on wet paper facing and damp lumber when the attic is warm and the air is still. The sheathing, along with the top face of the drywall ceiling, is where growth can begin.
After repeated wetting, the insulation is saturated and water reaches the ceiling. The drywall may sag, and rings of brown staining appear on the ceiling of the room below.
Sheathing delaminates and loses its hold on the roofing nails. Rafters stay damp enough to decay, and mold covers large areas of the roof deck.
Once damp and packed down, insulation does little of its job and might not recover even when dry. The rooms beneath that section get colder or hotter, and you pay more for energy.
Saturated insulation is heavy. Wet from above, drywall loses strength at its fasteners and may fall without warning, with the wet insulation coming down too.
Attics hold junction boxes, recessed light housings and cable runs. Water in or on them is a shock and fire risk, so stay out until the power is checked.
With poor ventilation, mold commonly grows on the bottom of the roof deck. It can cover a wide area before anyone goes up to look.
Our inspection covers the flashing points, roof deck, exhaust ducts and vents, and tells us if the water is condensation, a leak, or both. How far it spread is shown by moisture meters and thermal imaging.
Insulation that is soaked or has mold gets bagged and carried out, giving the wood and the drywall below a chance to dry. We protect the living space below and keep the access path contained.
With dehumidifiers and air movers, the sheathing, joists and rafters return to normal moisture levels. Visible mold is cleaned from the wood and an antimicrobial is applied.
We point out the roof or ventilation problem that needs correcting and can share our findings with your roofer. Once the attic stays dry, new insulation goes in to restore the R-value.
It depends on the material, how long it stayed wet and how clean the water was. We test before we decide, and we tell you why.
Call (669) 316-8404| Material | Can usually be saved when | Has to be replaced when |
|---|---|---|
| Recessed lights and wiring | They check out dry and corrosion free when an electrician inspects them | Water got inside the housing or connections show rust |
| Insulated ductwork | Outer jacket is intact and the insulation inside stayed dry | The wrap holds water, has grown mold, or is pulling the duct down |
| Cellulose insulation | Dampness on top only, and the material has not packed down | Soaked through or packed down, which is most of the time |
| Rafters and joists | Sound wood with nothing worse than light mold or surface stains | A screwdriver pushes into rotted wood, or the member has cracked |
| Fiberglass insulation | A small patch wet by clean rain and dried quickly | Any mold, dirt or matting, or wetness lasting past a few days |
Have a different question? Call us and we will answer it over the phone.
Call (669) 316-8404Take action now and prevent costly damage. Silver Spring Restoration is ready to help.
Call (669) 316-8404 Now