Water does not wait for business hours, and neither do we. Call any time and we will get a team moving.
We photograph the damage, log moisture readings and send the paperwork your adjuster asks for, so you have less to chase.
Certified technicians, professional drying equipment and moisture readings you can see for yourself. No guesswork.
Most people who call us have never dealt with wet carpet drying before. We walk you through it on the phone, then send a local crew with the right equipment.
There is always more water in a soaked carpet than the surface suggests. The face fibers can feel only damp while the pad underneath is soaked like a sponge and the subfloor below it is wet too. Towels and a shop vacuum reach the top layer and little else. In Silver Spring, we pull the water out, take moisture meter readings on each layer, and place drying equipment that works down to the subfloor.
Whether the carpet can be saved depends on two things, how clean the water was and how long it has been wet. If the water came out of a clean supply line and we reach it fast, the carpet can normally stay down while it dries. With an appliance leak, which is gray water, we often discard the pad, then clean and treat the carpet. Sewage or outside flood water means carpet and pad both come out.
It depends on the material, how long it stayed wet and how clean the water was. We test before we decide, and we tell you why.
Ask a Tech: (669) 316-8404| Material | Can usually be saved when | Has to be replaced when |
|---|---|---|
| Tack strip | Nails are rust free, the wood is not swollen, and it got wet briefly | Any rust, mold or swelling, or contact with dirty water |
| Carpet pad | Only a small section got wet, from clean water, and drying begins that day | Gray or black water, or soaked for more than a day or two |
| OSB or particleboard subfloor | Flat at the edges, firm, and dry on the meter within a few days | Seams have risen, or the board flakes and feels soft |
| Drywall at the floor line | Dampness stayed near the floor and the board is solid after drying | Soft, swollen, moldy, or wicked up by dirty water |
| Carpet | Clean water, wet less than two days, backing still firmly attached | Soaked by flood water or sewage, or delaminating at the backing |
Thermal imaging and meter readings show us where the water went, closets and the space under walls included. The water category gets identified as well, since it determines what we can keep.
We use weighted extraction tools that squeeze water from carpet and pad at once. This removes far more than a wand alone, and it shortens the drying time that follows.
Some jobs call for floating the carpet on a cushion of air, others for lifting it and taking the pad out. Dehumidifiers and air movers stay on until the subfloor and the carpet each test dry.
Where needed, an antimicrobial goes on the subfloor and carpet, then new pad is laid if the old was removed, and the carpet is stretched back on its tack strip and cleaned.
Growth usually starts on the underside of the carpet, where it is dark and damp. Your nose finds it well before anything shows on the surface.
When carpet is wet, the finish on wooden legs and the rust from metal glides transfer into it. Such spots are frequently there for good, while the legs soak up water and swell.
Pad can hold many times its weight in water. The carpet over it and the floor under it keep getting damp from the pad, even once the surface seems dry.
Water that started clean does not stay that way. It collects bacteria and dirt from the pad and fibers, which can turn a simple drying job into a removal.
Water travels through the pad far beyond the patch you can see. It slips beneath walls into neighboring rooms while the tack strip begins to absorb it.
That sour wet carpet odor shows up as bacteria multiply in the damp pad. Mold can begin growing on the backing and on dust trapped deep in the fibers.
The latex that holds the backing together breaks down, so the carpet delaminates and ripples. Nails in the tack strip start rusting, and the subfloor swells.
Carpet and pad left wet this long generally cannot stay. Mold has often reached the subfloor and the bottom of the drywall, so the job grows.
Have a different question? Call us and we will answer it over the phone.
Call (669) 316-8404Don't wait for small problems to become expensive emergencies. Call Silver Spring Restoration for fast, reliable service.
Call (669) 316-8404 Now